TABLA

 

History

It was invented in India but still the history of this instrument is uncertain, and has been the subject of sometimes heated debate. Rebecca Stewart^[2] suggested it was most likely a hybrid resulting from the experiments with existing drums such as pakhawaj, Mridang, dholak and naqqara. The origins of tabla repertoire and technique may be found in all three and in physical structure there are also elements of all three: the smaller pakhawaj head for the dayan, the naqqara kettledrum for the bayan, and the flexible use of the bass of the dholak.
A common legendary account credits the 13th century Indian poet Amir Khusrau as the inventor of the tabla.^[3] He split the mridangam or the pakhawaj in two. ('tora, tab bhi bola - tabla': 'When broke, it still spoke' - a fairly well known Hindi pun) None of his writings on music mention the drum, but this apparent tradition of late invention, combined with the absence of the instrument in South Indian music, and that the tabla closely resembles a Mrudangam cut into two,the closed-ended, paired design that relates it to the Western clay-drums and tympani, altogether supports the view that the tabla is a comparatively recent development in northern Indian music. Other accounts place the invention of this instrument in the 18th century, and the first verifiable player of this drum was Ustad Suddhar Khan of Delhi.
The Muktesvara temple (6th-7th century) and Bhuranesvara (and three other cave temples) of Badari in Mumbai(6th century) contain depictions of the puskara drum. Musicians often placed the puskara's smaller vertical drum (called 'alinga'), on their lap and played more than one drum at a time. Similar regional instruments include the Punjabi dukkar, the Kashmiri dukra, the duggi in eastern Uttar Pradesh, and the mridangam. The mridang, the predecessor of the pakhavaj, is the principal drum in Carnatic music. The dhol (dholak) of eastern Afghanistan is related in terms of both construction and playing style. The main distinction of the tabla is the pairing of two different types of single-headed drums, whereas the dukkar, dukra, and duggi are pairs of the same type and the mridangam and dhol are double-headed, barrel-shaped drums.

Nomenclature and construction

The smaller drum, played with the dominant hand, is sometimes called dayan (literally "right"), dāhina, siddha or chattū, but is correctly called the "tabla." It is made from a conical piece of mostly teak and rosewood hollowed out to approximately half of its total depth. The drum is tuned to a specific note, usually either the tonic, dominant or subdominant of the soloist's key and thus complements the melody. The tuning range is limited although different dāyāñ-s are produced in different sizes, each with a different range. Cylindrical wood blocks, known as ghatta, are inserted between the strap and the shell allowing tension to be adjusted by their vertical positioning. Fine tuning is achieved while striking vertically on the braided portion of the head using a small hammer.
The larger drum, played with the other hand, is called bāyāñ (literally "left") or sometimes dagga, duggī or dhāmā. The bāyāñ has a much deeper bass tone, much like its distant cousin, the kettle drum. The bāyāñ may be made of any of a number of materials. Brass is the most common, copper is more expensive, but generally held to be the best, while aluminum and steel are often found in inexpensive models. One sometimes finds that wood is used, especially in old bāyāñs from the Punjab. Clay is also used, although not favored for durability; these are generally found in the North-East region of Bengal.
The name of head areas are chat (keenar), maidan and syahi.
Both drum shells are covered with a head (or puri) constructed from goat or cow skin. An outer ring of skin (keenar) is overlaid on the main skin and serves to suppress some of the natural overtones. These two skins are bound together with a complex woven braid that gives the assembly enough strength to be tensioned on the shell. The head is affixed to the drum shell with a single cow or camel hide strap laced between the braid of the head assembly and another ring (made from the same strap material) placed on the bottom of the drum.
The head of each drum has a central area called the Syahi (lit. "ink"; a.k.a. shāī or gāb). This is constructed using multiple layers of a paste made from starch (rice or wheat) mixed with a black powder of various origins. The precise construction and shaping of this area is responsible for modification of the drum's natural overtones, resulting in the clarity of pitch (see inharmonicity) and variety of tonal possibilities unique to this instrument. The skill required for the proper construction of this area is highly refined and is the main differentiating factor in the quality of a particular instrument.

Main article: Syahi

For stability while playing, each drum is positioned on a toroidal bundle called chutta or guddi, consisting of plant fiber or another malleable material wrapped in cloth.

Basic strokes

Some basic strokes with dayan on right side and bayan on left side are:

• Ta: (on dayan) striking sharply with the index finger against the rim
• Ghe or ga: (on bayan) holding wrist down and arching the fingers over the syahi, the middle and ring-fingers then strike the maidan (resonant)
• Tin: (on dayan) placing the last two fingers of the right hand lightly against the syahi and striking on the border between the syahi and the maidan (resonant)
• Dha: combination of Ta and Ghe
• Dhin: combination of Tin and Ghe
• Ka or kit: (on bayan) striking with the flat palm and fingers (non resonant)
• Na or ta: (on dayan) striking the edge of the syahi with the last two fingers of the right hand
• Tit: (on dayan) striking the center of the syahi with the middle finger
• Ti: (on dayan) striking the center of the syahi with the index finger (resonant)

[edit] Gharānā — tabla tradition

The term gharānā is used to specify a lineage of teaching and repertoire in Indian classical music. Most performers and scholars recognize two styles of tabla gharana: Dilli Baj and Purbi Baj. Dilli (or Delhi) baj comes from the style that developed in Delhi, and Purbi (meaning eastern) baj developed in the area east of Delhi. Delhi Baj is also known as Chati baj (Chati is a part of Tabla from where special tone can be produced).
Musicians then recognize six gharānās – schools or traditions – of tabla. These traditions appeared or evolved in presumably^{[citation needed]} the following order:

1. Delhi gharānā
2. Lucknow gharānā
3. Ajrara gharānā, later followed by
4. Farukhabad gharānā
5. Banares gharānā
6. Punjab gharānā

Other tabla performers have identified further derivations of the above traditions, but these are subjective claims not universally recognized.^{[citation needed]} Some traditions indeed have sub-lineages and sub-styles that meet the criteria to warrant a separate gharānā name, but such socio-musical identities have not taken hold in the public discourse of Hindustani art music, such as the Qasur lineage of tabla players of the Punjab region.
Each gharānā is traditionally set apart from the others by unique aspects of the compositional and playing styles of its exponents. For instance, some gharānās have different tabla positioning and bol techniques. In the days of court patronage the preservation of these distinctions was important in order to maintain the prestige of the sponsoring court. Gharānā secrets were closely guarded and often only passed along family lines. Being born into or marrying into a lineage holding family was often the only way to gain access to this knowledge.
Today many of these gharānā distinctions have been blurred as information has been more freely shared and newer generations of players have learned and combined aspects from multiple gharānās to form their own styles. There is much debate as to whether the concept of gharānā even still applies to modern players. Some think the era of gharānā has effectively come to an end as the unique aspects of each gharānā have been mostly lost through the mixing of styles and the socio-economic difficulties of maintaining lineage purity through rigorous training.
Nonetheless the greatness of each gharānā can still be observed through study of its traditional material and, when accessible, recordings of its great players. The current generation of traditionally trained masters still hold vast amounts of traditional compositional knowledge and expertise.
This body of compositional knowledge and the intricate theoretical basis which informs it is still actively being transmitted from teacher to student all over the world. In addition to the instrument itself, the term tabla is often used in reference to this knowledge and the process of its transmission.

• Ustad - a master of the tabla technique and gharana, or school. Hindus are referred to as Pandit.
• Gharana - any of the six schools (Punjab, Delhi, Benares, Ajrara, Lucknow, Farukhabad) of tabla.
• Syahi - the black spots on the tabla, also called gab. Composed of a dried paste derived from iron filings and applied in several separate layers to the head of the drum. Sometimes called the syahi.
• Keenar - the outer ring of skin on the head of each of the two tabla drums. In Hindi, known as the chat.
• Sur - The area between the gaab and the keenar. In Hindi, known as the maidan.
• Bol - both mnemonic syllables and a series of notes produced when stroked. E.g. Na, tin, Dha, Dhin, Ge, Ke, etc.
• Theka - a standard series of bols that form the rhythmic basis of tabla accompaniment for a given tala.
• Rela - a sort of rapid drum-roll.
• Chutta - the cushions used when placing the tabla.
• Baj, Baaj, or Baaz - a style of playing, different from the gharānā. Two main styles developed, Purbi Baj and Dilli Baj. Dilli, or Delhi, baj is the *style of bols and playing that originated in the city of Delhi. Purbi (meaning "eastern") developed in the area east of delhi. Both have different ways to play bols.
• Bāyāñ or Duggi- The metal drum providing the bass notes in tabla.
• Dayan or Tabla - The wooden drum providing the treble notes in tabla.
• Lay (or Laya) - tempo.
• Tala (or Tāl) - rhythm cycle; meter. Example: Dadra Tala, Ada Chautal, Teental, and the most common, keherwa,deepchandi,tilwara,dhamar,jatt taal,
• Sam - the first beat of a tāl.
• Vibhag - Taal division.
• Tāli - clap.
• Khali - off or no claps.
• Ghatta - Wooden dowels used to control the tension.